Powder Paint Sprayer - 2nd shift

General Description (Summary description of the primary duties and objectives of the position.)

Sets up and operates hand, robotic, or electrostatic paint spray or dip equipment involving wet or powder painting of manufactured products. Paints a wide variety of parts and subassemblies. May mix paints or other finish materials to specified color, consistency, or viscosity. May also do other paint/finishing roles such as paint technician, spray equipment repair, or strip tank/washer attendant. May operate baking oven and monitor temperatures and bake cycle times.

Requirements Profile (Competencies, skills, abilities, experience, education necessary.)

* Able to work standing constantly and with frequent bending and twisting.

* Able to occasionally lift 35 lbs. from floor to waist; lift 50lbs from waist to shoulders; and push / pull up to 15 lbs.

* Able to frequently carry 35-55 lbs.

* Able to reach constantly forward, frequently laterally and occasionally over the shoulders.

* Able to occasionally grasp with moderate force.

* Able to rotate to other work in the zone, department, division or plant as required.

* May be required to read blueprints and use measuring tools to ensure that the finish is within quality specifications.

* Able to visually inspect for defects.

* Must be able to apply finishes to specified thicknesses and quality standards.

* Must be able to load, clean, adjust, and maintain spray equipment.

* Must be able to meet required takt/cycle time as established.