Metrology Technician II

Taxable Entity

ALCYON TECHNICAL SERVICES JV

Job Title

Metrology Technician II

Location

OH Brookpark TIALS L293 - Cleveland, OH 44135 US (Primary)

Category

Science Technology Engineering and Mathematics

Job Type

Full-time

Typical Pay/Range

$65,500 to $72,500

Education

Associate Degree

Travel

None

Security Clearance Required:
None

POSITION OVERVIEW AND PRIMARY DUTIES AND RESPONSIBILITIES (ESSENTIAL FUNCTIONS):

The Metrology Technician II supports the Technical Information, Administrative, and Logistics Services (TIALS) Contract, at NASA Glenn Research Center in Cleveland, OH.

Responsible for the calibration and certifying test equipment to technical specifications in one of the major equipment classifications of electronic, electro-mechanical, pressure systems, flow, mechanical, photo-optical and physical/dimensional measuring.

Primary/Major Duties and Responsibilities (Essential Functions):

Responsible for the calibration and certifying test equipment to technical specifications in one of the major equipment classifications of electronic, electro-mechanical, pressure systems, flow, mechanical, photo-optical and physical/dimensional measuring. The incumbent will utilize calibration methods and techniques based on principles of measurement science, technical analysis of measurement problems, and accuracy and precision requirements.

The Metrology Technician II identifies magnitude of error sources contributing to uncertainty of results to determine reliability of measurement process in quantitative terms, diagnoses and repairs malfunction in complex measuring and test equipment using theories of operation, block diagrams, schematics, logic trees, and software diagnostics to the component level. This worker provides training to apprentice technicians on metrology principle, resolving technical problems, and complicated electronic theory. This worker will inspect measuring and test equipment for preventive maintenance, cleanliness, and safety requirements, analyze and interpret results of measurements and calibrations using mathematical formulas, and document results of measurements and calibrations on calibration certificates and calibration correction charts.

Technician must perform a variety of duties with latitude for making modifications and adjustments as necessary, be able to troubleshoot and correct malfunctions. Under minimal supervision, performs a variety of technical tasks of increased complexity including testing, calibration, and repairs on various equipment. The technician receives technical guidance as required from engineering or a higher-level technician. The work is to be performed with a positive attitude, and in a productive, proficient manner.

Duties and Responsibilities:

• The Metrology Technician II supports the Technical Information, Administrative, and Logistics Services (TIALS) Contract, at NASA Glenn Research Center in Cleveland, OH.

• Independently tests, calibrates, and repairs electrical, mechanical, electromechanical, and electronic measuring, recording, and indicating instruments and equipment for conformance to established standards, and assists in formulating calibration standards.
• Identifies magnitude of error sources contributing to uncertainty of results to determine reliability of measurement process in quantitative terms.
• Provides training to apprentice technicians on metrology principle, resolving technical problems, and complicated electronic theory.
• Plans sequence of testing and calibration procedures for instruments and equipment, according to blueprints, schematics, technical manuals, and other specifications.
• Sets up standard and special purpose laboratory equipment to test, evaluate, and calibrate other instruments and test equipment.
• Disassembles instruments and equipment, using hand tools, and inspects components for defects.
• Measures parts for conformity with specifications, using micrometers, calipers, and other precision instruments. Aligns, repairs, replaces, and balances component parts and circuitry.
• Reassembles and calibrates instruments and equipment.
• Completes all calibration documentation in prescribed systems with a high level of accuracy and in a timely manner.
• If authorized by the manager, may conduct Quality Control (QC) and Quality Assurance (QA) inspections.
• If authorized by the manager, may perform the duties of the Responsible Area Coordinator (RAC) for the work center. Typically assigned to the most senior technician in the work center.
• Performs other duties as assigned

Secondary Duties and Responsibilities:

• Other duties as assigned.
• If authorized by the manager, may conduct QC and QA inspections.
• Assist Engineer in procedure writing and validation.
• Check the Measurement Uncertainty Analysis (MUA), Test Uncertainty Ratio (TUR) and guard-banding.
• Assist Engineer in validating software and document.
• Provides technical assistance to customer, when required.
• Comply with all other applicable provisions of the Contract.
• Comply with all Company Policies, Procedures, and Directives in the performance of duties under the current contract.
• Comply with all Contract Policies, Procedures, and Work Instructions in the performance of duties under the contract.
• Comply with all provisions of the Contracts Safety Plan.
• Comply with all provisions of the Contracts Quality Plan.
• Comply with all provisions of the Contracts Organizational Conflict of Interest (OCI) Avoidance Plan.
• Comply with applicable NASA instructions, policies and directives.

REQUIRED QUALIFICATIONS AND EXPERIENCE:

AS degree in a technical discipline plus 2 to 4 years of relative experience.

RAC's require experience in all aspects of the existing work center.

Experience: In lieu of a degree,6 years of experience of production experience in a commercial laboratory or equivalent industry may be substituted

Skills:

Must be able to interface effectively with other personnel.

Must be able to physically lift 50 lbs.

Must perform work safely, in compliance with HS&E requirements, and take actions to ensure a safe working environment.

Proficient in Excel, writing macros and formulas.

Solid analytical skills and statistical processes and methods.

Solid communication and teamwork.

Possess a working knowledge of ISO 17025 standards and ANSI Z540.1 and 3 Standards.

Preferred Education and Experience

• Please see above.

Physical Demands:

These physical demands are representative of the physical requirements necessary for an employee to successfully perform the essential functions of the job. Reasonable accommodation may be considered to enable people with disabilities to perform the described essential functions.

Work Environment:

Indoor, controlled climate with little to no exposure to hazardous material.

Afognak Native Corporation, Afognak Commercial Group, LLC, and their subsidiaries are equal opportunity employers. Qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, citizenship status, age, sex or gender (including pregnancy, childbirth and related medical conditions), gender expression or gender identity (including transgender status), sexual orientation, marital status, military and veteran status, physical or mental disability, protected medical condition as defined by applicable state or local law, genetic information or any other characteristic protected by applicable federal, state or local laws ("protected status").

The pay range information provided is a general guideline. The pay rate offered will be determined based on the candidate's experience and qualifications, as well as geographic locations, market data, and other business considerations, as permitted by law.

Our full range of benefits include medical, dental, vision, disability protection, life insurance, prescription coverage, voluntary benefits, paid leave, and 401(k) retirement. Positions covered by the McNamara O'Hara Service Contract Act (SCA), Davis-Bacon Act (DBA), or a Collective Bargaining Agreement (CBA), or Fair Labor Standards Act (FLSA) will comply with the statute or CBA requirements as well as other client-customer contract requirements (all benefits are subject to eligibility requirements). For more information, please visit our Company's Career page.